Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation

Chao Xiao; Xian Zhang; Long-Gui Zheng; Ye-Zheng Xiao; Yan-Lan Hu

doi:10.1007/s10118-026-3878-0

您当前的位置：

首页 >

文章列表页 >

Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation

RESEARCH ARTICLE | 更新时间：2026-11-03

- Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation
- Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation
- Chinese Journal of Polymer Science 2026年44卷页码：1-12
- 作者机构：
  
  Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
- 作者简介：
  
  zlonggui@ipp.ac.cn
- 基金信息：
  
  This work was financially supported by the Comprehensive Research Facility for Fusion Technology Program of China (No. 2018-000052-73-01-001228), Research on Performance Improvement and Key Technology of Quench Detection System of EAST Device of China (No. E05F0K153Z1), and the National Natural Science Foundation of China (No. 52403120).;The authors declare no interest conflict.Electronic supplementary information (ESI) is available free of charge in the online version of this article at http://doi.org/10.1007/s10118-026-3878-0.The data related to this paper are data that should not be shared. The data can be obtained from the author for reasonable reasons. Author's contact information: Chao Xiao, e-mail: cxiao@issp.ac.cn.
- DOI：10.1007/s10118-026-3878-0
  中图分类号：
- 收稿：2026-06-09，
  
  录用：2026-09-07，
  
  网络首发：2026-11-02，
  
  纸质出版：2026-10
- 稿件说明：
移动端阅览
Xiao, C.; Zhang, X.; Zheng, L. G.; Xiao, Y. Z.; Hu, Y. L. Cracking behavior analysis of thermoplastic polyimide under vacuum pressure impregnation. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3878-0

Chao Xiao, Xian Zhang, Long-Gui Zheng, et al. Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation[J/OL]. Chinese Journal of Polymer Science, 2026, 441-12.
Xiao, C.; Zhang, X.; Zheng, L. G.; Xiao, Y. Z.; Hu, Y. L. Cracking behavior analysis of thermoplastic polyimide under vacuum pressure impregnation. Chinese J. Polym. Sci. https://doi.org/10.1007/s10118-026-3878-0 DOI：

Chao Xiao, Xian Zhang, Long-Gui Zheng, et al. Cracking Behavior Analysis of Thermoplastic Polyimide under Vacuum Pressure Impregnation[J/OL]. Chinese Journal of Polymer Science, 2026, 441-12. DOI： 10.1007/s10118-026-3878-0.

摘要

Abstract

Thermoplastic polyimide (TPI) insulated wires

which exhibit excellent insulating and radiation-resistant properties at extremely low temperatures

are designated as connection lines for the quench detection system of superconducting magnets. However

extensive cracking was unexpectedly observed after the implementation of vacuum pressure impregnation (VPI). The cracking behavior of TPI-insulated wires during the VPI process was systematically investigated. The results reveal that the failure is a multi-factor coupled phenomenon involving synergistic interactions between thermal

mechanical

and chemical mechanisms. First

the coiled configuration imposes sustained tensile stress on the outer arc of the insulation

while the extrusion process introduces molecular orientation and residual stresses into the TPI matrix. Although the VPI temperature (130 °C

72 h) is well below the glass transition temperature (about 245 °C)

sub-

segmental relaxation and amorphous structural rearrangement occurred

leading to free volume redistribution and residual stress relaxation. The constraint of the metallic conductor further restricts dimensional recovery

thereby promoting microcrack initiation. Second

low-molecular-weight species from the epoxy system

particularly the curing agent HY918 and the accelerator DY073-1

permeate into the amorphous regions

of TPI

causing plasticization

swelling

and enhanced segmental mobility

which significantly reduces the local resistance to yielding and crack propagation. Under sustained bending stress

this results in a typical environmental stress cracking (ESC) acceleration effect. Third

the substantial mismatch in the coefficients of thermal expansion between the TPI and the metallic conductor generates considerable thermal stresses during the VPI thermal cycle

further exacerbating the cracking risk. Based on the mechanistic understanding

a protective strategy was implemented by wrapping the TPI wires with a thermal insulation layer prior to VPI. The protected specimens successfully passed the vacuum Paschen test

confirming that this approach effectively prevented resin permeation and thermally induced structural transitions in TPI insulation. This strategy provides a reference for the failures of quench diagnostic wires in similar superconducting magnets.

关键词

Keywords

references

Wu, G.; Qi S.; Tian G.; Wu D. Preparation and characterization of low cte thermoplastic copolyimide resins based on the structural design of block sequence. Eur. Polym. J. 2023 , 195 , 112249..

Cao, X.; Yang S.; Huang Q.; Pan Z.; Xie Y.; Tong Y.; He K. Thermoplastic polyimides with enhanced processability and thermal stability via molecular structure modulation. Polym. Eng. Sci. 2025 , 65 , 5389−5401..

Hall, M. A.; Lewis, B.; Shull, K. R. Thermomechanical characterization of high Tg disulfide-containing thermoplastic polyimides. Macromolecules 2025 , 58 , 2065−2072..

Nazarychev, V. M.; Pavlov, A. A.; Kamalov, A. M.; Borisova, M. E.; Didenko, A. L.; Ivan'kova, E. M.; Kraft, V. E.; Vaganov, G. V.; Nikolaeva, A. L.; Ivanova, A. S.; Lavrentiev, V. K.; Popova, E. N.; Abalov, I. V.; Blokhin, A. N.; Bugrov, A. N.; Kudryavtsev, V. V. The effect of synthesis conditions and chemical structure of thermoplastic polyimides on their thermomechanical properties and short-term electrical strength. Polymers 2025 , 17 , 1385..

Gao, J.; Auchmann, B.; Hug, C.; Pautz, A.; Sanfilippo, S. Study of a current-based quench detection method for cct magnets via a co-wound superconducting sensing wire. IEEE Trans. Appl. Supercond. 2021 , 31 , 4701105..

Miyoshi, Y.; Bruton, A.; Cormany, C.; Liao, M.; Mitchell, N.; Schild, T.; Barden, R.; Everitt, D.; Freudenberg, K.; Guilliams, V.; Hughes, D.; Martovetsky, N.; Rossano, G.; Vandergriff, D.; Wooley, K.; Khumthong, K.; Norausky, N.; Ortiz, E.; Sheeron, J.; Smith, J. Selected topics of technical challenges of the ITER central solenoid. IEEE Trans. Appl. Supercond. 2024 , 34 , 4205405..

Piccin, R.; Rigaud, J. S.; Santillana, I. A.; Buchanan, K. E.; Ternova, D.; Mitchell, N.; Liao, M.; Luongo, C. Environmental stress cracking of thermoplastic polyimide insulated wires. IEEE Trans. Appl. Supercond. 2024 , 34 , 7700405..

Goodwin, A. A.; Whittaker, A. K.; Jack, K. S.; Hay, J. N.; Forsythe, J. Absorption of low molecular weight penetrants by a thermoplastic polyimide. Polymer 2000 , 41 , 7263−7271..

Clayton, N.; Evans, D.; Gung, C. Y.; Pastor, O.; Piccin, R.; Cerignat, S.; Huang, X.; Li, G.; Crouchen, M. Extraction of instrumentation wires through the high-voltage insulation of the ITER magnet feeder system. IOP Conf. Ser. Mater. Sci. Eng. 2019 , 502 , 012185..

Rudeiros Fernández, J. L.; Navarro, C.; Arbelaez, D.; Ferracin, P.; Prestemon, S.; Shen, T.; Vallon e, G. Interface characterization for superconducting magnets. IEEE Trans. Appl. Supercond. 2024 , 34 , 4703105..

Hsieh, A. J.; Desper, C. R.; Schneider, N. S. Transient crystallization of an aromatic polyetherimide: effect of annealing. Polymer 1992 , 33 , 306−313..

Sung Chun, Y.; Weiss, R. A. Thermal behavior of poly(ether ketone ketone)/thermoplastic polyimide blends. J. Appl. Polym. Sci. 2004 , 94 , 1227−1235..

Zi, Y. C.; Wu, G. J.; Pei, D. X.; Guo, S.; Qi, S. L.; Tian, G. F.; Wu, D. Z. Decreasing the CTE of thermoplastic polyimide by blending with a thermosetting system. Chinese J. Polym. Sci. 2023 , 41 , 956−961..

Huo, P. P.; Friler, J. B.; Cebe, P. NEW-TPI thermoplastic polyimide: thermal analysis and small-angle X-ray scattering. Polymer 1993 , 34 , 4387−4398..

Hsiao, B. S.; Sauer, B. B.; Biswas, A. Crystallization study of a thermoplastic polyimide (new-TPI). J. Polym. Sci. Part B Polym. Phys. 1994 , 32 , 737−747..

He, J.; Niu, X.; Chen, W.; Chen, W.; Yu, Y.; Fan, H. Preparation and properties of soluble thermoplastic polyimides with phenol side-groups for flexible copper clad laminates. High Perform. Polym. 2025 , 37 , 271−285..

Robertson, C. G.; Monat, J. E.; Wilkes, G. L. Physical aging of an amorphous polyimide: enthalpy relaxation and mechanical property changes. J. Polym. Sci. B Polym. Phys. 1999 , 37 , 1931−1946..

Arnold, F. E. Jr, Bruno, K. R.; Shen, D.; Eashoo, M.; Lee, C. J.; Harris, F. W.; Cheng, S. Z. D. The origin of β relaxations in segmented rigid-rod polyimide and copolyimide films. Polym. Eng. Sci. 1993 , 33 , 1373−1380..

Ree, M.; Swanson, S.; Volksen, W. Effect of precursor history on residual stress and relaxation behaviour of high temperature polyimides. Polymer 1993 , 34 , 1423−1430..

Gautreaux, C. R.; Pratt, J. R.; St Clair, T. L. A study of crystalline transitions in a thermoplastic polyimide. J. Polym. Sci. Part B Polym. Phys. 1992 , 30 , 71−82..

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

Structural Regulation and High-temperature Thermo-oxidative Aging Behavior of Quartz Fiber/Thermoplastic Polyimide Composites

Decreasing the CTE of Thermoplastic Polyimide by Blending with a Thermosetting System

Bioinspired Zinc-doped Nano Hydroxyapatite Reinforced Poly(lactic acid) Composites for Bone Repair

End-group and Side-chain Dual-engineering of Selenium-fused Acceptors for 20.08% Efficiency Polymer Solar Cells with Low Energy Loss

Pyrimidoisoindigo-based Polymers for Ambipolar Charge Transport